ELECTRONIC ACCESSORIES
Power
Supplies, TE-Controllers, Pre-Amplifiers, Data Acquisition Systems,
etc...
_____________________________________________________________
 |
EOS
manufactures support electronics for our detector products.
This product line includes power
supplies, preamplifiers,
temperature controllers,
lock-in amplifiers and a variety of custom data acquisition
systems.
Our
goal is to deliver the right combination for each user's
application.
One
of the great advantages of these units is that the end user
can directly
plug them into any EOS receiver module without additional
wiring.
EOS electronics are designed for extremely low noise operation
resulting in
optimum detector system performance.
All power supplies are CE Marked.
Below you will find our standard accessories:
|
_____________________________________________________________
Move
mouse over for back side |
PS
- 1
Low
Noise Power Supply
The
PS-1 provides very low noise, +/- 15VDC. This unit operates
with all EOS
receiver modules, including all biasing requirements.
In addition, the PS-1 works well as a general purpose, dual
polarity laboratory
power supply. Unless otherwise specified, the factory setting
is 120VAC.
The voltage is selected by rotating the small board beneath
the fuse to read
either 120 or 240. EOS can customize the number of channels
of the PS-1
to power several receivers at once. Please review the one,
two, and five channel
specifications below. This product is CE marked.
DATA SHEETS:
PS-1
- PS-1/2C
- PS-1/5C
|
_____________________________________________________________
|
Move
mouse over for back side
|
PS
- 1B
Ultra
Low Noise - Battery Operated Power Supply
The
PS-1B is an ULTRA LOW NOISE, battery operated
power supply
designed primarily for powering all EOS' receiver modules
and preamplifiers.
The PS-1B will operate as a standard PS-1, or as a battery
powered supply.
In the PS-1 mode the output will be +/- 15VDC; in the battery
powered mode,
the output will be +/- 12V. This unit can be customized
up to 2 channels.
DATA
SHEETS: PS-1B
|
_____________________________________________________________
Move
mouse over for back side |
PS
/TC-1
Power
Supply / TE Controller
The
PS/TC-1 combines the low noise +/- 15VDC power supply for
the
amplifiers with a closed-loop proportional controller and
power supply
for all the TE coolers offered with EOS detectors.
The PS/TC-1 was designed specifically for the thermoelectric
cooler control
characteristics but can also be used a general purpose power
supply.
One of the great advantages of the PS/TC-1 is that the end
user can directly
plug it into any TE-cooled EOS receiver module without additional
wiring.
DATA
SHEETS: PS/TC-1
|
_____________________________________________________________
|
|
TC-2
Board
Level Controller
This
module is an OEM version of the TE cooler controller
which can easily be designed into users' equipment.
It operates from a 5VDC supply and features status indicators
and a variable temperature setpoint.
DATA
SHEETS: TC-2
|
_____________________________________________________________
|
|
AMPLIFIERS
EM-Series
- LOG/LOG - Lock-In Amplifiers
In
addition to the amplifiers integrated into our receivers,
EOS offers a line of stand-alone amplifier modules.
These units, which support both photodiodes and photoconductors,
are available in multi-stage or multi-channel configurations.
They offer a wide selection of gain/bandwidth characteristics.
Custom designs are also available.
DATA
SHEETS: LIA-1 - EM-SERIES
|
_____________________________________________________________
|
|
LIA/PS-1
Lock-In
Amp / Power Supply
The
LIA / PS-1 is a combination lock-in amplifier and
low noise power supply which powers all EOS'
receiver modules and interfacing to the receiver preamplifiers.
In addition, the PS-1 works well as a general purpose,
dual - polarity laboratory power supply.
DATA
SHEETS: LIA/PS-1
- QSP-1
|
|
|
